How to fix Error 757 on Windows 11

by

Why This Error Happens

Error 757 (ERROR_TRANSLATION_COMPLETE) is a Plug and Play resource-arbitration error that occurs when the PnP resource translator (used to map bus-relative resources like IRQs, memory ranges, or I/O ports into system global space) has already completed its translation, but a subsequent driver or service attempts to translate the same resource block again. This typically happens due to outdated or conflicting device drivers, a corrupted PnP resource database, or a BIOS/ACPI table that reports overlapping hardware resources. It is most commonly logged in the System Event Log when a PCI, USB, or storage controller device fails to properly enumerate its resources during boot or after a driver update.

Step-by-Step Resolution Guide

  1. Identify the offending device
  • Open Event Viewer (eventvwr.msc) → Windows Logs → System.
  • Filter for Event ID 757 and note the source device/driver name listed in the event details.
  1. Update or reinstall the driver for that device
  • Open Device Manager (devmgmt.msc), locate the device identified in Step 1.
  • Right-click → Update driver → Search automatically for drivers.
  • If no update is found, right-click → Uninstall device (check “Delete the driver software for this device” if prompted), then reboot to let Windows reinstall it.
  1. Clear the PnP resource cache
  • Open an elevated Command Prompt and run:

    net stop PlugPlay
    del /f /s /q %SystemRoot%\System32\config\SOFTWARE-old
    net start PlugPlay
  • Reboot the system afterward.
  1. Check for resource conflicts manually
  • In Device Manager, enable View → Devices by connection.
  • Look for devices with a yellow warning icon; open their Properties → Resources tab to check for “conflicting device list” entries.
  • Disable any legacy/unused devices (especially older ISA or COM/LPT port devices) that may be forcing static IRQ/memory assignments.
  1. Update the system BIOS/UEFI firmware
  • Check your motherboard or laptop manufacturer’s support page for the latest BIOS/UEFI update, since outdated ACPI tables are a frequent root cause.
  • Apply the update following the manufacturer’s instructions, then reboot and re-check Device Manager for errors.

Alternative or Verification Steps

  • After completing the steps, re-open Event Viewer and confirm Error 757 no longer appears after a fresh reboot; also verify no devices in Device Manager show a yellow exclamation mark.
  • If the error persists, run sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth to rule out system file corruption, and consider performing a clean boot to isolate a third-party driver causing the resource conflict.